Humboldt -Testing Equipment for Construction MaterialsFor U.S. Orders & Quotes
hmc@humboldtmfg.com
1.800.544.7220 or fax: 1.708.456.0137
International Orders & Quotes
hmc@humboldtmfg.com
1.708.456.6300 or fax: 1.708.456.5412
Store > Concrete > Moisture, Cured Slabs > Meters
Cart | Items: 0
The Concrete Encounter is a hand-held electronic moisture meter, which uses non-destructive impedance measurement to determine moisture levels in concrete floor. The Concrete Encounter will give you an instant reading of moisture content to over 6% for concrete and 0-10 comparative for gypsum floor screeds, enabling you to make an informed decision on when to install floor coverings. Designed to be used on clean, dust-free slabs, just switch on and press the instrument firmly against the floor surface. Readings are the read directly from the analog meter. Coplanar electrodes with spring-loaded contacts enhance signal depth and sensitivity to a depth of .5" (12.5mm).
Concrete Encounter for Moisture Testing— HC-2990
$446.00 Add to Order
Advanced Moisture/Humidity meter measures the moisture content, relative humidity, temperature and dew point of concrete and gypsum flooring. The meter enables you to carry out four individual tests:
Moisture content of concrete or gypsum flooring
Relative humidity, temperature and dew point of floor environment
Below surface, In-situ measurements of Relative humidity, temperature and dew point per ASTM F2170-02
Relative humidity, temperature and dew point above floor surface using RH hood test method BS 5325-2001 & 8202-2001
Moisture Mode: Measures concrete from 0 to 7% moisture, 0 to 12 (comparative) for anhydride and gypsum screeds and 0 to 100 reference.
Hygrometer Mode/RH Mode: Measures 5 to 98% RH, 14 to 120°F (-10 to 50°C) and 0.1% RH 1°C/F.
Can store 900 readings in 30 files, large LCD display, RS232 port. Power supply is 9 volt PP3 lithium manganese battery. Includes meter, software and PC cable.
Moisture Meter and Thermo-Hygrometer— HC-2991
$704.00 Add to Order
Kit includes: a HC-2991 Moisture and Humidity Meter with Software and PC Cable, Two Relative Humidity Probes, RH Probe Calibration Check Solution with Sleeve, Pack of twelve RH Sleeves, and optional instant read Infrared Surface Thermometer.
Use to perform ASTM F2170-02 and ASTM F2420-05.
Moisture Meter and Thermo-Hygrometer— HC-2992
$1305.00 Add to Order
RH Sleeves for use with HC-2992
RH Sleeves, pack of 12— HC-2991.1
$35.00 Add to Order
site map | terms and conditions of sale | privacy policy
©2008 Humboldt Mfg. Co.