Distillation Equipment Accessories

For U.S. Orders & Quotes
hmc@humboldtmfg.com
1.800.544.7220 or fax: 1.708.456.0137

International Orders & Quotes
hmc@humboldtmfg.com
1.708.456.6300 or fax: 1.708.456.5412

Store > Asphalt > Distillation > Accessories

Cart | Items: 0

Asphalt

Marshall
- Heavy Duty Compactors
- HD Compactor Hammers
- HD Compactor Accessories
- Standard Duty Compactors
- SD Compactor Hammers
- SD Compactor Accessories
- Molds
- Accessories
- Sample Ejector
- Hand Compactors
- Compression Machines
- Test Set
- Compression Accessories
- Load Rings
- Water Baths
Mix Testing
- Mixers
- QuarterMaster
- Permeameters
- Furnace
Rice Test
- Pycnometers
- Accessories
- De-Airing Table
- Vacuum Pumps
SHRP Equipment
- Gyratory Compactor
- Revolving Shelf Oven
- Bending Beam Rheometer
- Vacuum Degassing Oven
- Pressure Aging Vessel
Saybolt Viscometer
- Viscometer Bath
- Components
- Accessories
Viscosity
- Bath
- Vacuum Regulators
- Ford Cup
- Float Test
- Cloud and Pour
Viscometer
- Seitfuchs
- Asphalt Institute
Spot Test
Softening Point
- Apparatus
- Components
- Thermometers
Ductility
- Machines
- Molds
- Force Determination
- Accessories
Grease
- Consistency
Sample Containers
- Moisture Boxes
- Tin Sample Cups
- Transfer Dish
- Bacon Bomb Sampler
- ASTM Oil Sampler
Penetration
- Penetrometers
- Needles
Distillation
- Cut-Back
  - Components
- Emulsified
  - Components
- Dean-Stark
  - Components
- Volatile Distallates
- Moisture Distallates
- Accessories
- Distillation Traps
Particle Charge
- Meter
Solubility
- Test Set
- Replacment Parts
Cleveland Flash
- Tester
- Replacement Parts
Tag Flash
- Tester
- Components
Carbon Residue
- Conradson
Centrifuge
- Extractors
- Filter Rings
- Replacment Parts
- Value Extractors
- Hand-driven
- Filter Paper
Vacuum Extraction
- Extractor
- Replacement Parts
Reflux Extraction
- Sets
- Components
Dispensers

Accessories

Aluminum Tar Still— H-1871

Used with H-2290 for determining water in crude petroleum, tars and derivatives of those materials. Cover has 1 tubulure. Dimensions: 3-1/2" (89mm) ID x 6" (152mm) Inside depth. 1 qt. (0.9 liter) capacity. Cast aluminum. Meets ASTM D95, D370, D1461, AASHTO T55, T59, T83, T110.

Aluminum Tar Still— H-1871

$114.00 Add to Order

Aluminum Alloy Still— H-2345

Used with H-2285 for identifying cationic emulsions and as a container to determine water content and residue by distillation and evaporation. Cover has 3 tubulures (2 drilled 10/18 and 1 drilled 24/40), 3-3/4" (95mm) ID x 9-1/2" (241mm) inside depth. Meets ASTM D95, D244,
AASHTO T55, T59, T110.

Aluminum Alloy Still— H-2345

$296.00 Add to Order

Aluminum Alloy Still— H-2346

Same as H-2345, except cover has 4 tubulures (3 drilled 10/18 and 1 drilled 24/40)

Aluminum Alloy Still— H-2346

$300.00 Add to Order

Glass Tube Stopper— H-2345TS

Glass Tube Stopper

Glass Tube Stopper— H-2345TS

FOR BEST PRICING Call 1.800.544.7220

Thermometer Stopper— H-2345TTS

Thermometer Stopper

Thermometer Stopper— H-2345TTS

FOR BEST PRICING Call 1.800.544.7220

Ring Burner— H-1876

Can be used with all gases. 4-3/4" (121mm) ID x 5-1/2" (140mm) OD. Overall shank length is 11" (279mm) with 3/8" (10mm) serrated hose connection. Guide pins keep burner equidistant around still. Fletcher attachment regulates gas and air. Meets ASTM D244, AASHTO T59.

Ring Burner— H-1876

$132.00 Add to Order

Distillation Shield— H-1940

Use with H-1880. Flanged, open-end, stainless steel cylinder with 1/8" ceramic lining and two-part cover. For use with 500ml flask. Flame distillation only. Meets ASTM D402, AASHTO T78.

Distillation Shield— H-1940

$98.00 Add to Order

Flame Shield— H-1945

Use with H-1880. Stainless steel, spot-welded cone 2" (51mm) dia. at bottom with spring clip to fit 7/16" to 5/8" (11 to 16mm) burner tubes. Meets ASTM D402, AASHTO T78.

Flame Shield— H-1945

$15.00 Add to Order