For U.S. Orders & Quotes
hmc@humboldtmfg.com
1.800.544.7220 or fax: 1.708.456.0137

International Orders & Quotes
hmc@humboldtmfg.com
1.708.456.6300 or fax: 1.708.456.5412

Aggregate

Shakers

Gilson Testing Screens (Hand Clamping)— H-4276

Gilson Testing Screens (Hand Clamping)— H-4276

The model H-4276 (with hand clamping) is ideal for sizing samples of crushed stone, sand gravel, slag, coal, coke, wood chips, ores, pellets, and similar materials. The hydraulic clamping model is recommended for heavy-use situations.

These testing screens with hydraulic or hand clamping are ideal for particle size determinations of crushed stone, sand and gravel, slag, ores, woodchips and similar coarse materials. Samples are quickly processed into as many as seven separations in as little as three to five minutes. Typical batch sizes up to one cubic foot (0.028m3) or more vary with material type.

Both testing screens are often used with fine mesh sizes down to #200 on larger samples when less efficient separation is acceptable. Low-amplitude drive shafts and speed variation accessories are available to optimize machine performance when testing finer samples or special materials. Both units feature high capacity screening for large samples, enclosed drive mechanism for safety, and sturdy feet designed for permanent mounting.

The unit has a six-tray capacity. Included with each unit are five course screen trays withmesh up to a #4 screen and one dustpan tray (specify desired mesh sizes when ordering). Shipping Wt. 470 lbs. (214 kg).

Testing Screen with hand clamping
Material Size: 4" (104mm) to No. 200 mesh (14.75mm)
Maximum Capacity: 1 cu.ft. (0.3m3) 80 lbs (36kg)
Gilson No. TS2
Overall Tray Size: 18" x 26" (457 x 660mm)
Trays independently removable
In-progress viewing
Motor: 1/2 HP capacitor
Dimensions: 23 x 31 x 33" (584 x 787 x 838mm)

Gilson Testing Screens (Hand Clamping)— H-4276

$3620.00 Add to Order

Screen Shakers—H-4276.5F

Screen Shakers—H-4276.5F

220V 50Hz version of the H-4276 Screen Shaker. Has a 1/3hp motor.

Screen Shakers—H-4276.5F

$3910.00 Add to Order

Gilson Testing Screens (Hydraulic Clamping)— H-4283

Gilson Testing Screens (Hydraulic Clamping)— H-4283

Same as H-4276 unit with hydraulic clamping.

Testing Screen with hydraulic clamping
Material Size: 4" (104mm) to No. 200 mesh (14.75mm)
Maximum Capacity: 1 cu.ft. (0.3m3) 80 lbs (36kg)
Gilson No. TS1
Overall Tray Size: 18" x 26" (457 x 660mm)
Trays independently removable
In-progress viewing
Special speed and/or amplitude available
Motor: 1/3 HP capacitor
Dimensions: 23 x 31 x 33" (584 x 787 x 838mm)

Gilson Testing Screens (Hydraulic Clamping)— H-4283

$3910.00 Add to Order

Dustpan Tray— H-4283P

Dustpan Tray— H-4283P

Dustpan tray for H-4276 and H-4283 Testing Screens

Dustpan Tray— H-4283P

$65.00 Add to Order

Sand AttachmentAggregate Screen Shakers Shakers H-4281T

Sand AttachmentAggregate Screen Shakers Shakers H-4281T

Sand Attachments for H-4276 and H-4283 Testing Screens

Sand Attachment— H-4281T

$298.00 Add to Order

Tray Rack— H-4285

Tray Rack— H-4285

Tray Rack for H-4276 and H-4283 Testing Screens

Tray Rack— H-4285

$165.00 Add to Order

Door Enclosure— H-4286

Door Enclosure— H-4286

Door Enclosure for H-4276 and H-4283 Testing Screens

Door Enclosure— H-4286

$160.00 Add to Order

Clean-n-Weigh Accessory— H-4307

Clean-n-Weigh Accessory— H-4307

Clean-n-Weigh Accessory for H-4276 and H-4283 Testing Screens

Clean-n-Weigh Accessory— H-4307

$268.00 Add to Order

Gilson Test-Master® (6 Tray Model)— H-4273A

Gilson Test-Master® (6 Tray Model)— H-4273A

Gilson Test-Master Testing Screens feature an integrated, moveable material hopper for easier sample introduction and vertically-hinged panel doors for improved access and clearance. The 1.6 ft3 (45.3L) hopper is hinged at the rear and allows the sample to be introduced incrementally if desired, as the machine is running. When the hopper is closed, a panel blocks dust from escaping through the opening. The units feature reliable counter-balanced drive assembly, fully enclosed operation and electronic digital controller. Internal rotating counterweights of the drive system equalize the vertical screening action to assure smooth, quiet operation and prevent transfer of vibrations to other lab instruments.

Factory-installed options allow greater versatility for processing a wider range of materials. These accessories also reduce particle breakage during screening of sensitive materials such as coal and coke.

Screen tray capacity of the H-4273 model is six (five included) plus the dust pan. The unit is fully enclosed to minimize dust and have built-in digital timers for maximum test repeatability.

Included are five course screen trays with mesh up to #4 screen and one dustpan tray (specify desired mesh sizes when ordering). Shipping Wt. is 650 lbs. (295 kg).

Test-Master® (6-tray)
Material Size: 4" (104mm) to No. 200 mesh (14.75mm)
Maximum Capacity: 1 cu.ft. (0.3m3) 80 lbs (36kg)
Model Gilson No. TM5
Overall Tray Size: 18" x 26" (457 x 660mm)
Counter-balanced
Digital timer
Totally enclosed
Motor: 1/3 HP capacitor
Dimensions: 27 x 33 x 45" (686 x 838 x 1143mm)

Gilson Test-Master® (6 Tray Model)— H-4273A

$6810.00 Add to Order

Gilson Test-Master® (7 Tray Model)— H-4274A

Gilson Test-Master® (7 Tray Model)— H-4274A

Same as H-4273, 7-Tray Model

Test-Master® (7-tray)—Gilson No. TM6
Material Size: 4" (104mm) to No. 200 mesh (14.75mm)
Maximum Capacity: 1 cu.ft.(0.3m3) 80 lbs (36kg)
Gilson No. TM6nOverall Tray Size: 18" x 26"(457 x 660mm)
Trays independently removable
In-progress viewing
Special speed and/or amplitude available
Motor: 1/3 HP capacitor
Dimensions: 27 x 33 x 45" (686 x 838 x 1143mm)

Gilson Test-Master® (7 Tray Model)— H-4274A

$7260.00 Add to Order

Prev. 1 2 3 Next